BPDA-700 Battery Powered Hydraulic Double Acting 700 Bar Pump
This Battery Powered Hydraulic Double Acting 700 Bar Pump has been designed for general purpose use where larger capacity, or multiple cylinders are required to get the job done. Including Anchor testing, Jacking, Track Pin Press, Crimpers, Wire & Pipe Cutters etc.
It’s control features, including a fully adjustable pressure output, pressure holding, and load lowering valves, and pendant switch, will allow the user a high degree of control and safety during operation. The 2 speed pump offers fast cycling times under low load conditions. Flow rates of 6.6 lpm @ 60 Bar, and 0.6 lpm @ 700 Bar – one of the top performers for Battery pumps of this type.
The high volume reservoir ensures oil temperature is kept to a minimum while in use and helps maintain performance levels. This Battery Powered Hydraulic Double Acting 700 Bar Pump has been designed and manufactured here in NZ, with NZ conditions and usage in mind.
We have erred on the side of caution and chosen to construct the unit in a more rugged fashion, both for it’s protection and to ensure a long lifespan.
More Information
- Pump: 2 Speed Radial Piston, 6.6 lpm @ 60 Bar, 0.6 lpm @ 700 Bar
- Reservoir: Alloy 15 Litre capacity (11 Litres useable)
- Control Valving: 3 position centre closed manual valve in conjunction with an integral pilot check valve on both ports.
- Pressure Settings: Adjustable, 100-700 bar max
- Special option: Needle Valve fitted to Retract Port for fine control of tension release
- Couplers: Pioneer PC3000-3 series
- Motor: 1.5kW Brushless, wired pendant controller.
- Battery: 82V 4Ah Victa/Briggs & Stratton (Supplied separately)
